If you want to operate a leaf blower, first, you must start it properly. A handheld leaf blower is very simple to start. But there are some facts about starting the blower, including turning on the choke or turning the throttle when the engine is too cold.
In this article, we are going to discuss the process of starting and operating the Husqvarna 360BT leaf blower.
Is Husqvarna easy to start?
The smart start technology of the Husqvarna 360BT leaf blower made it very easy to start the machine. The technology of the leaf blower is unique because a chainsaw is installed with the machine. If there is no bad fuel in the engine and the engine condition is good, you can easily start the Husqvarna.
The process of starting a Husqvarna 360BT leaf blower
In the following steps (1–4), we provide the continuous process of starting a leaf blower.
Step 01: Take the machine outside of your home
The indoor start of a leaf blower can be dangerous. The machine can emit fumes. When it enters our bodies, it can be dangerous for our health.
Step 02: Push the purge bulb
Before starting the Husqvarna leaf blower, you have to push the purge bulb continuously. This process allows the fuel to flow into the clear tube.
Step 03: Hold the machine
You must perfectly hold the body of the machine with your left hand. Therefore, the machine will not recede when you pull the cord to start the engine immediately. Be careful; you should not hold the machine with your foot.
Step 04: Pull out the cord
You should hold the starter cord with your right hand and pull it out slowly. When you can feel some resistance, you can pull it with the necessary force. You may have to pull the cord continuously several times until the machine starts.
How can I start the Husqvarna 360BT when the engine is cold?
Sometimes it becomes hard to start an engine because it remains cold. In this situation, you have to close the choke and set the throttle lever about one-third open before starting the engine. Now, you can pull the starter cord, and therefore the machine will start without any delay.
Why is my Husqvarna 360BT leaf blower’s engine not starting, although the weather is not too cold?
Sometimes, the leaf blower’s engine does not start even though the choke is closed or the engine is hot. In this situation, you have to understand that the spark plug of the engine has carbon. So, clean the plug efficiently and try to start the engine again.
How can I stop the engine of the Husqvarna 360 BT blower?
When the Husqvarna 360BT leaf blower is complete, you have to be prepared to stop the engine. There is a throttle lever on the leaf blower. But, when the engine has reached a sufficient temperature to be started, there is no need to pull up the choke.
Cautions of using a Husqvarna 360BT leaf blower
Before starting the engine of the Husqvarna, you have to use the following protective items to save yourself:
- An eye-protective glass
- Hearing protection equipment
Using the equipment will keep you safe from any unwanted accidents. Moreover, exercising proper caution when operating the machine will keep you safe from any type of unwanted fatal injury.
Which engine does the Husqvarna 360BT leaf blower use?
The Husqvarna 360BT leaf blower uses an X-Torq® engine. It is an outstanding machine that can be operated with less fuel. On several other sides, the engine needs a simple and pocket-friendly cost.
However, the 80% less emission and the 20% less fuel consumption of the Husqvarna 360BT leaf blower made it also environment friendly.
Why can I not start my leaf blower smoothly?
Sometimes, the leaf blower’s engine becomes very hard to start. A blocked air filter is mainly responsible for the issue. As a result, the engine of the leaf blower gets the oil but cannot get a sufficient amount of air. As a result, the leaf blower cannot start smoothly, and sometimes it does not start at all.
Wrapped up
Husqvarna, a Swedish leaf blower, can present an excellent outlook for your garden. If you can start the machine properly, it can give you good performance for longer. So, start by using the choke when the engine is cold, and keep the spark plug clean.