These tools can make our sanding jobs faster and easier. You cannot always find the perfect tools when shopping online. Instead, we get confused between many products available and we decision gets difficult. It is also not easy to find the exact information you are looking for. We have written the best benchtop belt sander review for you. We have found the 10 best benchtop belt sanders for you. You can pick the one which suits your working and budget. The below-given tools are recommended and used by experts. They all have a good reputation in the market.

Top 10 Best Benchtop Belt Sanders Review

1. Jet J-4002 Bench Belt Disc Sander

JET J-4002 1’x42′ Belt and Disc Sander (577003)

It is a two in one device. You can use it as a quality belt sander and it is also an efficient disc sander. It has a 1/3 HP motor. It has enough power to easily sand the trickiest surfaces. You can easily switch between belt sander and the disc sander, you can easily meet your requirements. It has an accurate mitre gauge which turns up to 45-degrees.

The disc sander also has a removable platen so you can take it off to sand the surfaces by hand. Once it is assembled you can use it easily. But, it is a bit difficult to assemble. Also, you are not allowed to use aftermarket parts for the disc sander. But still it is the best benchtop disc and belt sander combo.

2. WEN 6502 Bench Belt And Disc Sander

WEN 6502 4 x 36-Inch Belt and 6-Inch Disc Sander with Cast Iron Base

If you need a sander that can perform a variety of tasks, then this is your choice. It has a 4 x 36-inch belt, it is a common belt and can be replaced easily. It is capable of covering large sanding areas which makes it good for larger projects. You can also use it as a disc sander so you can easily clean the ends of pieces. You can rotate the main belt up to 90-degrees, so you can do all kind of sanding jobs without any frustration.

The most important factor about this sander is its price. It just has control problems. You cannot keep it out of the list of best benchtop belt sander 2024.

3. Rockwell RK7866 Bench Belt Sanding Machine

Rockwell Belt/Disc Combo Sander

It has the potential to be a good benchtop belt sander. It also has a belt that can be turned from 0 to 90 degrees, so you can do sanding from many angles. It also has a disc sander with a platen which can be adjusted to 45 degrees. Due to this platen, there will be no issue in sanding bevelled edges.

Unfortunately, it lacks high power. You cannot do heavy-duty work using this tool. Also, the sanders with low power have low life. If you want to do just the basic task, then this is your tool because it is cheap.

4. WEN Belt Disc Sander With Cast Iron Base

WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base

It is a beginner’s tool. If you need a small but a strong tool to do a decent sanding, then this is your choice. You cannot use it for heavy professional tasks as its motor is not that much powerful. It has all the tools that you need in sanding. You can adjust its sander to vertical for maximum use. The belt changing is also easy. A very useful for the persons who need to change the belt frequently

It is suitable for polishing wood material and also it is noise-free. Using a different belt, you can also use it on metal. But it can get noisy. It is affordable that even a beginner can purchase it without any problem. You should add it to the list of best small woodshop benchtop belt shelter.

5. Grizzly Belt And Disc Sander H6070

Grizzly Industrial H6070 – 1′ x 30′ Belt/5′ Disc Combo Sander

Not everyone needs a powerful sanding machine. This Grizzly sander is the perfect option for those people. It has a low price, it is lightweight and pre-assembled. There are many belts and discs available in the market for this sander. But the motor has less power. The construction is cheap its table and mitre gauge are not reliable for critical objects.

Due to its lightweight, it is easily portable. As it comes preassembled even a beginner can use it without any issue. This machine saves a lot of time. If you don’t need a fancy sander then this can be your sander.

6. Porter-Cable Benchtop Disc Belt Sander

Porter-Cable PCB420SA Belt with 8′ Disc Bench Sander, 4′ x 36′

It is a very powerful sander. It has a pick iron base which reduces the vibration, ensuring that there are no wobbles. It has power equal to the JET. It has a 4 x 36-inch belt. If you are working with smaller or sensitive blades, then you will need a tool which uses a smaller belt for progressive work.

It is best among the belt processors as changing the belt is very easy. You can also use it on wood without any issue. It is indeed best benchtop belt 2024.

7. 1”x5” Belt Disc Sander Best For Metal

1′ X 5′ Belt Disc Sander Wood Metal Hobbyist 3600 RPM

This sander is ideal for a hobbyist and a DIY. It is perfect for small to medium projects. It is two in one, it works as a belt sander and you can also use it as a disc sander.

Its belt is 1” and the disk is 5”. It will work perfectly on wood and also on metal. It can be used for polishing, sharpening and many more. It will never disappoint you.

It has a powerful 2.5 Amp motor it is quite enough for small to medium projects. You can change the inbuilt table from 0 to 45 degrees without any problem. After getting the desired angle you can lock the table into its place. It is a good sander but you cannot use it for larger projects. It is very small for those tasks. However, it is one of the best benchtop belt sender for metal.

8. Black Decker DS321 Dragster Belt Sander With Dust Bag

BLACK+DECKER Belt Sander with Dust Bag, 7-Amp, 3-Inch by 21-Inch (DS321)

Most of the sanders have a big roller at the front end which stops the sander to fit into a tight corner. When you are sanding a flat surface the most difficult part is to sand the corners. But the roller of dragster is small. Using this tool, you can easily sand the corners. With its flip-up front hood we can get even closer. You should be careful when using this tool, but it is handy for many sanding jobs. Using its 3 position handle you can change its angle according to your need.  It also has a dust bag.

It is suitable for small and larger projects. You should shake it after a while when handling larger projects. It is one of the best benchtop belt sander under 100 dollars.

9. RIKON 50-112 Belt Disc Sander

Rikon 50-112 4-Inch x 36-Inch Belt 6-Inch Disc Sander

If you have a small shop, then it is very suitable for you. Due to the reputation of the RIKON brand, it is a great pick. You adjust it between 0 to 90 degrees. The disc will not protrude the belt. The vibration produced is equal to none.

The power of its motor is ½ HP, which is enough for small daily routine tasks. The heavy jobs will bog down the motor and the sander might freeze. It is very convenient for small tasks.

But it has a 5-year long warranty. Regardless of its drawbacks, it is one of the best small woodshop benchtop belt sander.

10. POWERTEC BD4600 Bench Belt Disc Sander

POWERTEC BD4600 Belt Disc Sander For Woodworking | 4 In. x 36 in. Belt Sander with 6 In. Sanding Disc

If you want a basic belt and disc sander with affordable price, then this is your required tool. It has only one work table and the belt can be adjusted to 90 degrees. The belt is very easy to replace. The power of the motor is ½ HP and it is ideal for handling small tasks.

It is very affordable. But, it is not designed for larger tasks. It will bod down with a lot of pressure. If you want just a basic machine, then you should buy this sander.


These were our top-ranked benchtop belt sanders. You should look for the strength of the sander before buying it. If you can afford more than we recommend not to save a few bucks and buy a powerful sanding tool. Because it will last longer and the output will also be good.

Here are most commonly asked questions about sanding tools.


Can I use a belt sander on metal?

Should I buy a two in one sander?

 How do I know about the type of sandpaper that my sander needs?

Leave a Reply

Your email address will not be published. Required fields are marked *